Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front/Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation -1-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Free up the coolant hose -arrow-.

-- Remove the bolt -4- and remove the bracket.

-- Loosen the clamps -2 and 3- and remove the coolant hoses from the Charge Air Cooling Pump -V188- with the Hose Clamps - Up To 25mm3094.

Fig 2: Charge Air Cooling Pump -V188-, Tightening Specifications

Courtesy of AUDI OF AMERICA, LLC