Knock Sensor 1 And 2 -G61- / -G66-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications, refer to OVERVIEW - IGNITION SYSTEM .
-- Install the lower intake manifold section, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .
-- Install the compressor, refer to Turbocharger, Supercharger .