LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (3.0L - Ignition/Glow Plug System - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 28 Ignition/Glow Plug System >> General Information And Safety Precautions >> Safety Precautions, Test And Measuring Instruments During Test Drive

Safety Precautions, Test And Measuring Instruments During Test Drive

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

If testing equipment must be used during a road test, observe the following:

WARNING:

Distraction and testing equipment that is not secured properly can cause accidents.

The passenger airbag could pose a risk if it deploys in a collision.

  • Operating testing equipment while driving is a distraction.
  • Testing equipment that is not secured probably increases the risk of injury.
  • Always secure testers on the rear seat with a strap and have a second person on the rear seat operate them.
scientia non olet · About LEMON Manuals