Halogen Headlamps, Overview
NOTE:
Adjust the headlamps after performing any work that could have affected their adjustment, refer to HEADLAMPS, ADJUSTING .
- Headlamp Housing
- Removing and Installing, refer to HEADLAMP, REMOVING AND INSTALLING .
- Housing Cover
- For daytime running lamp.
- Light Bulb
Vehicles through MY 09
- H7 - 12V, 55 W
- Changing bulb, refer to HIGH BEAM BULB, THROUGH MY 09, REMOVING AND INSTALLING .
Vehicles from MY 10
- 12 V, 15/55 W (H15)
- Bulb, Replacing, refer to Left High Beam Headlamp Bulb -M30- / -M32- OR -L174- / -L175-, FROM MY 10, REMOVING AND INSTALLING .
- Adjustment Screw
- For headlamp height adjustment.
- Ball Joint
- For headlamp height adjustment.
- Adjusting Nut
- For headlamp height adjustment.
- Seal
- Front Adjuster
- For adjusting headlamp to fender and bumper contour.
- Bolt
- Tightening specification, refer to HEADLAMP HOUSING BRACKET AND MOUNT OVERVIEW .
- Bolt
- Tightening specification, refer to HEADLAMP HOUSING BRACKET AND MOUNT OVERVIEW .
- Retaining Clip
- For securing headlamp housing to housing mount
- Headlamp Housing Mount
- Assembly Overview, refer to HEADLAMP HOUSING BRACKET AND MOUNT OVERVIEW .
- Bolt
- Tightening specification, refer to HEADLAMP HOUSING BRACKET AND MOUNT OVERVIEW .
- Bolt
- Tightening specification, refer to HEADLAMP HOUSING BRACKET AND MOUNT OVERVIEW .
- Outer Adjuster
- For adjusting headlamp to fender and bumper contour.
- Rear Adjuster
- For adjusting headlamp to fender and bumper contour.
- Housing Cover
- For low beam.
- Headlamp Range Control Positioning Motor
- Left Headlamp Beam Adjustment Motor -V48-
- Right Headlamp Beam Adjustment Motor -V49-
- Removing and Installing, refer to Left Headlamp Beam Adjustment Motor -V48- AND Right Headlamp Beam Adjustment Motor -V49-, REMOVING AND INSTALLING .
- Low Beam Bulb
- H7 - 12V, 55 W
- Changing bulb, refer to LOW BEAM BULB, REMOVING AND INSTALLING .