Passenger Occupant Detection Sensor, Additional Safety Precautions

CAUTION:

A re-zero procedure must be performed on the passenger occupant detection system control module each time the front passenger seat and/or backrest cover is disengaged.
Do not bend the passenger occupant detection system mat.
A leaking mat must be replaced (service kit).
Do not bend the passenger occupant detection system pressure hose.

Make sure components of passenger occupant detection system do not fall onto hard surfaces, do not come into contact with grease and do not risk damage by resting against sharp objects.
The mat, the crease and various covers must be fitted to be free of folds.
When installing, make sure seat cushion and seat cover are positioned correctly.
Replace the various upholstery clamps and clips and verify their correct positioning on seat.

Basic setting of the system is only possible between temperatures of 0 C and +40 C.
Make sure that no objects are placed on seat when performing basic setting.
Using additional seat cushions such as pillows impairs the function of the passenger occupant detection system and the air bag system.