LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (6.0L - Engine Mechanical, Engine Code(S): BSB) >> 15 - Engine - Cylinder head, Valvetrain >> Cylinder head, removing and installing >> Cylinder Head, Assembly Overview >> Cylinder bank 2 (left):

Cylinder bank 2 (left):

WARNING: This page is about a different variant/trim than selected.

Follow sequence - 1 to 21  - when loosening cylinder head bolts.

NOTE:
  • Arrow points in direction of travel.
Fig 1: Cylinder Head Bolts Loosing Sequence - Cylinder Bank 2 (Left)
G00469423Courtesy of AUDI OF AMERICA, INC.

Tightening sequence cylinder bank 2 (left): 

NOTE:
  • Arrow points in direction of travel.
Fig 2: Tightening Sequence Cylinder Head Bank 2 (Left)
G00481339Courtesy of AUDI OF AMERICA, INC.