Back-Up Lamp Bulb, Removing and Installing

Removing 

Fig 1: Housing Cover & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove inner rear light → Inner Tail Lamps, Removing and Installing .
• Remove the bolts - arrows  - and the housing cover - 1  -.

Fig 2: Socket, Bolts & Electrical Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect electrical connector - 2  -.
• Remove the bolts - arrows  - and the socket - 1  - with the bulb.

Fig 3: Electrical Connectors & Socket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect the electrical connectors - 1  - and - 2  - on the socket - 3  - with the bulb.

Installing 

Install in reverse order of removal, observing the following:

• Install inner rear light → Inner Tail Lamps, Removing and Installing .

Tightening Specifications