Cover and upholstery for headrests with slide in locking mechanism, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove headrest with insertion lock → Headrest with slide in locking mechanism, removing and installing .

Fig 1: Cover And Upholstery For Headrests With Slide In Locking Mechanism Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pry fastening strips - 3 - (4x) out with a screwdriver.
Remove button - 2 -.
Remove cover and upholstery - 1 -.

Fig 2: Removing/Installing Cushion Out Of Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove cushion - 2 - out of cover - 3 -.

Installing

Insert cushion - 2 - with proper fit in cover - 3 -.
Insert headrest mount - 1 - in upholstery with cover.
Press retaining strips firmly in guide channel (test by pulling).