Rear Lid Remote Control Lock Switch E233 and Fuel Tank Lid Unlock Button E319, removing and installing
Fig 1: Identifying Catches, Electrical Harness Connector, Rear Lid Remote Control Lock Switch E233 And Fuel Tank Lid Unlock Button E319
Removing
CAUTION:
- Switch off all electrical components.
- Switch ignition off and remove ignition key.
- Remove front door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .
- Disconnect electrical harness connector - 2 - at switch for Rear Lid Remote Control Lock Switch E233 and Fuel Tank Lid Unlock Button E319 - 1 -.
- Carefully release catches - arrows - using a small screwdriver.
- Pull switch for Rear Lid Remote Control Lock Switch E233 and Fuel Tank Lid Unlock Button E319 downward out of switch mount.
Installing
Installation is performed in reverse order of removal, noting the following:
- Press switch into switch mount until catches engage.
- Install front door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION