Door opener light - bulb, removing and installing

Fig 1: Identifying Electrical Harness Connector, Bulb Socket, And Door Opener

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove relevant door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .
• Disconnect electrical harness connector - 3  -.
• Turn bulb socket - 2  - toward left and pull out at door opener - 1  -.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Insert light bulb for door opener light into opening and engage.
• Install respective door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .