ENGINE COOLANT TEMPERATURE SENSOR, DISCONNECTING ELECTRICAL CONNECTOR (Engine Code: BNK)

Procedure

-- Remove rear engine cover -arrows-.

Fig 1: Removing Rear Engine Cover

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect electrical harness connector -1- at Engine Coolant Temperature Sensor -G62- using Assembly Tool T10118.

Fig 2: Locating Engine Coolant Temperature (ECT) Sensor -G62-

Courtesy of AUDI OF AMERICA, LLC

NOTE:

For the sake of illustration, depicted without engine.

Disregard item -2-.

Install in reverse order.