Memory Stop, Removing And Installing: Installing

Fig 1: Identifying Slider And Seat Rail

Courtesy of AUDI OF AMERICA, LLC

-- If the memory stop has been replaced, clean this area of the seat rail to remove any residue of the previous memory stone.

-- Install the memory stop into the seat rail -1- by slightly tipping it toward the tunnel.

-- Engage the memory stop in the back catch -arrow-.

-- Tighten the rear seat bolt on the tunnel side -item  ) OVERVIEW - FRONT SEAT, STANDARD SEAT, MANUAL - Bolts.

-- Tilt the backrest back while sliding the seat all the way back (entry assistance).

-- Release the seat forward/back adjuster and slide the front seat into the desired position.