PEENED Triple Roller Joint AAR 2600 I Or 3300 I: Notes

Special tools and workshop equipment required 

• Thrust plate:VW 401 
• Thrust plate:VW 402 
• Punch:VW 408 A 
• Punch:VW 411 
• Tube:VW 416 B 
• Thrust pad:VW 447 H 
• Hose clamp pliers:V.A.G 1275 
• Torque wrench:V.A.G 1331 
• Torque wrench:V.A.G 1332 
• CV joint boot clamp tool:V.A.G 1682 
• Assembly tool:T10065 
• Slide hammer - complete set:VW 771 
• Assembly device:T40018  for triple roller joint AAR 3300 i
• Assembly device:T40084  for triple roller joint AAR 2600 i
• Brass or copper drift