Ribbed Belt, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ribbed Belt Routing And Component Location Overview

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

Tightening specification, refer to OVERVIEW - SUPERCHARGER RIBBED BELT DRIVE .

-- Place the ribbed belt over the pulley as illustrated.

Generator
Idler Roller
Coolant Pump
A/C Compressor
Ribbed belt tensioner
Vibration damper

NOTE:

When installing the ribbed belt, make sure it is seated correctly on the pulleys.

-- Install the left front coolant pipes, refer to FRONT LEFT COOLANT PIPES, REMOVING AND INSTALLING .

-- Start the engine and check the belt routing.

-- Install the supercharger ribbed belt, refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .