LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> A5 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 529 (Heating, Ventilation & Air Conditioning (2 Of 2) (Sedan)) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Heater And A/C Unit Air Intake Housing, Removing And Installing >> Notes

Heater And A/C Unit Air Intake Housing, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

From 01/2008, A/C units which have an additional connection for the glove compartment cooling are being installed as a running change. On vehicles without glove compartment cooling, this connection is sealed with a plug. Refer to GLOVE COMPARTMENT COOLING CONNECTION ON AIR INTAKE HOUSING . Therefore, ensure the correct allocation of the right radiator housing and air intake housing .

From MY 2012, a new version is being used. Read all the information regarding this component. Refer to OVERVIEW - FRONT ACTUATORS, "Basis" VERSION .

scientia non olet · About LEMON Manuals