Interior Temperature Sensor Fan, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The same Interior Temperature Sensor Fan -V42- -B- is currently installed in both versions of the Climatronic Control Module -J255- A/C display and control heads ("Basis" -E- and "Convenience" -F-). The blowers run at different RPMs (approximately 2, 500 to 3, 200 RPM on the "Basis" version and approximately 2, 800 to 3, 500 RPM on the "Convenience" version) due to the different component location in the display and control head using the Vehicle Diagnostic Tester in the "Guided Fault Finding " function.
Depending on the version of the Climatronic Control Module -J255- A/C display and control head, there may be a molded seal -C-. Re-install it if necessary.