Flange Shaft Protective Ring, Replacing

Special tools and workshop equipment required 

• Pressure plate VW 401
  Fig 1: Identifying Thrust Plate VW 401

  Courtesy of AUDI OF AMERICA, LLC
• Pressure plate VW 402
  Fig 2: Identifying Thrust Plate VW 402

  Courtesy of AUDI OF AMERICA, LLC
• Punch VW 412
  Fig 3: Identifying Punch VW 412

  Courtesy of AUDI OF AMERICA, LLC
• Pipe 3146
  Fig 4: Pipe 3146

  Courtesy of AUDI OF AMERICA, LLC
• -3- Separating tool 22 to 115 mm, for example, Kukko 17/2
  Fig 5: Identifying Kukko Tools

  Courtesy of AUDI OF AMERICA, LLC

Fig 6: Identifying Separating Tool

Courtesy of AUDI OF AMERICA, LLC

B - Separating tool 22 to 115 mm, for example, Kukko 17/2

Fig 7: Installing Ring -A- On Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

• Protective ring installation location -A- : the larger outer diameter of the protective ring faces toward the flange.