Rear Final Drive
- Subframe
- Removing and installing, refer to OVERVIEW - SUBFRAME .
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Bolt
- 55 Nm
- Depending on the date of manufacture for the balance weight mounting BALANCE WEIGHT ON THE REAR FINAL DRIVE
- Heat Shield
- Bolt
- 20 Nm
- Driveshaft
- Removing and installing, refer to REMOVAL AND INSTALLATION .
- Rear Final Drive
- Versions with balance weight BALANCE WEIGHT ON THE REAR FINAL DRIVE
- All Vehicles except for Audi A8 and Q5 Hybrid removing and installing, refer to REAR FINAL DRIVE
- Audi A8 removing and installing, refer to the appropriate service information
- Audi Q5 Hybrid removing and installing, refer to the appropriate service information
- Driveshaft
- Removing and installing, refer to DRIVESHAFT BOLTED ON TRANSMISSION SIDE and DRIVESHAFT, MOUNTED ON TRANSMISSION SIDE
- Removing and installing on the rear final drive, refer to DRIVESHAFT, REMOVING FROM REAR FINAL DRIVE
- Crossmember