Attachments, Removing And Installing, Except AUDI RS5: Installing

• Tightening specification. Refer to OVERVIEW - BUMPER COVER, EXCEPT AUDI RS5 .

Install in reverse order of removal. Note the following:

-- When pressing on, make sure the end points are guided into the bumper cover before pressing on for the final time.

Trim Strip 

Fig 1: Identifying Bolts -Arrows-, Trim Molding -1- And Bumper Cover -2-

Removing

-- Remove the lower section of the bumper cover. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 => Lower Section .

-- Remove the bolts -arrows- .

-- Remove the trim molding -1- forward from lower section of the bumper cover -2- .

Installing

• Tightening specification. Refer to OVERVIEW - BUMPER COVER, EXCEPT AUDI RS5 .

Install in reverse order of removal. Note the following:

-- Install the lower section of the bumper cover. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 => Lower Section .