LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> A5 Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers (Coupe) >> 63 Bumpers >> Rear Bumper >> Attachments, Removing And Installing >> Attachments, Removing And Installing, AUDI RS5 >> Installing

Attachments, Removing And Installing, AUDI RS5: Installing

Install in reverse order of removal. Note the following:

-- The diffuser trim must engage completely.

Tail Pipe Trim 

Fig 1: Exhaust Pipe Trim (1 Of 2)
GWWA63-10310

Removing

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

-- Remove the bolts -arrows- .

-- Remove the tail pipe trim -1- inward from the bumper cover.

Installing

Fig 2: Exhaust Pipe Trim (2 Of 2)
GWWA63-10311

Install in reverse order of removal. Note the following:

-- Check the trim distance for the tail pipe -2- on the bumper cover -1- :

-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

scientia non olet · About LEMON Manuals