Attachments, Removing And Installing, Except AUDI RS5: Installing
- Tightening specifications. Refer to OVERVIEW - BUMPER COVER, EXCEPT AUDI S5 AND AUDI RS5 .
Install in reverse order of removal.
Trim Strip
Removing
-- Remove the front bumper cover end plate. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 => Bumper Cover End Plate .
-- Remove the bolts -arrows- .
-- Remove the trim molding -1- forward from the bumper cover -2- .
Installing
- Tightening specifications. Refer to OVERVIEW - BUMPER COVER AUDI S5 .
Install in reverse order of removal. Note the following:
-- Install the front bumper cover end plate. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 => Bumper Cover End Plate .
Headlamp Washer System Spray Nozzle Cover
Removing
-- Fold the washer nozzle cover -1- upward -arrow A- .
-- Using a screwdriver on the inner side, pry the spray nozzle cover -1- off the mount -2- -arrow B- and disengage it at the opposite side.
Installing
Install in reverse order of removal. Note the following:
-- Press the spray nozzle cover on until it engages audibly.