LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Fuel Supply System >> 20 - Fuel supply system >> Fuel supply system, vehicles with all wheel drive from 07.03 to 10.04 >> Fuel Level Sensor 2 G169 , removing and installing >> Installing

Fuel Level Sensor 2 G169 , removing and installing: Installing

Installation is in reverse order of removal. Note the following:

NOTE:
  • Replace seal.
  • When installing, be sure not to bend floater arm of fuel level sensor 2 G169.
  • Make sure fuel hose is seated securely.
Fig 1: Identifying Tab On Locking Flange Must Lie Between Tabs On Fuel Tank
GW00018619Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • - Arrow  - points in direction of travel.
Fig 2: Removing/Installing Locking Ring With Wrench T10202
GW00018589Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals