LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT >> 10 - Engine - Assembly >> Overview of component locations >> Overview of component locations >> Electrical harness connectors

Electrical harness connectors

Fig 1: Identifying Electrical Harness Connectors
GW00014441Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130 and Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)) Z29 (brown connector)

2 - Heated Oxygen Sensor (HO2S) G39 and Oxygen Sensor (O2S) Heater Z19 (black connector)



Fig 1: Identifying Electrical Harness Connectors
GW00014439Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Oil Pressure Sensor G10

2 - 3-pin connection (gray) for engine speed (RPM) sensor G28

3 - Engine Speed (RPM) Sensor G28

scientia non olet · About LEMON Manuals