Main fuse panel - vehicles with battery in engine compartment, removing and installing

Removing 

• Disconnect battery → Battery in engine compartment, disconnecting and reconnecting .

Fig 1: Identifying Plenum Chamber Cover & Removing Rubber Seal

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove rubber seal of plenum chamber cover in direction of - arrow  -.
• Remove plenum chamber cover - 1  - to front.

Fig 2: Identifying Cap, Nut At Electric Cable, And Nut For Carrier Fuse On Positive Post

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Fold cover - 2  - aside and remove nut - 3  - at terminal.
• Remove nut - 1  - for fuse (positive terminal).

Installing 

Install in reverse order of removal, noting the following:

• Reconnect battery. Required steps Audi A4 S4 Reconnecting . Required steps Audi RS4 Connecting .

Tightening torques