Daytime running lamps (DRL) switch, removing and installing

Where equipped, the daytime running lamps switch controls DRL lighting function where desired (on US vehicles only).

Removing 

• Remove light switch → Light Switch E1 , removing and installing .

Fig 1: Pressing Headlamp Range Control Adjuster Out Of Switch Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Reach through opening for light switch and press the switch unit out of the switch housing in direction of - arrow  -.
• Disconnect electrical connection.

Installing 

Install in reverse order of removal, noting the following:

• Install light switch → Light Switch E1 , removing and installing .