Garage Door Opener Control Module J530 - from 11.04, removing and installing
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
Removing
- Remove front bumper cover → 63 BUMPER .
Vehicles with headlamp washers
- Release clamp and remove hose - 1 -.
- Turn hose connector - 2 - on headlight washer system upward.
Continued for all
- Release retaining clips - 4 - and fold back retainer - 3 -.
- Remove module - 2 - from bumper cover.
- Disconnect electrical connection - 1 -.
Installing
Install in reverse order of removal, noting the following:
- Install front bumper cover → 63 BUMPER .