Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine

Procedure 

Fig 1: Evaporative Emission Canister Purge Regulator Valve N80 And Air Duct

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws - arrows  -.
• Remove Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 N80 - 1  - at air duct.
• Remove air duct - 2  -.

Fig 2: Identifying Intake, Mass Air Flow (MAF) Sensor G70 Electrical Harness Connector & Air Filter Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove air intake hose - 1  - between turbocharger and air cleaner housing.
• Disconnect electrical connection - 2  - at Mass Air Flow (MAF) Sensor G70.
• Pull off clip - 3  - and remove air cleaner housing together with Mass Air Flow (MAF) Sensor G70.

Install in reverse order of removal.