Fog lamp bulb, replacing
Removing
- Remove fog lamp assembly → Fog lamp housing, removing and installing .
Fig 1: Disconnecting Electrical Connection At Bulb And Turning Bulb Counter-Clockwise To Remove From Housing
- Disconnect electrical connection - 1 - at bulb.
- Turn bulb counter-clockwise - arrow - and remove from housing.
Installing
Install in reverse order of removal, noting the following:
CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
- Insert bulb and secure by turning in clockwise direction.
- Check and adjust fog lamps if necessary → 00 - TECHNICAL DATA .