Insulation compartment, removing and installing

Fig 1: Insulation Compartment Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Cold air hose

2 - Glove compartment

3 - Bolts (3x)

• Tightening torque 0.6 Nm

4 - Insulation box

Removing 

• Remove vent - 5  -.
• Remove bolts - 3  - (3x) and carefully pull insulation box out off glove compartment - 2  -.

5 - Vent

• Tighten as far as possible