Center Headrest Blind, Removing and Installing

Removing 

• Remove rear seat bench → Rear Bench Seat, Removing and Installing .
• Remove rear seat backrest → Rear Backrest, Removing and Installing .
• Remove center headrest → Center Headrest, Removing and Installing .

Fig 1: Left/Right Sides At Positions & Roller Blind

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pry out roller blind - 2  - on left and right sides at positions - 1  - (2x).
• Disengage roller blind - 2  - on left and right sides at positions - 3  - (2x) and remove roller blind - 2  -.

Installing 

Fig 2: Guides, Roller Blind, Locking Device & Pin

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• If reinstalling the old roller blind:
• Unroll the roller blind - 2  -.
• Using pliers, hold the pin - 4  - and rotate roller blind 14 - 15 times in the opposite direction of pulling out - arrow  -.
• Push in pin - 4  - and secure pin - 4  - e.g. using a paper clip.

• Engage roller blind - 2  - in guides - 1  -. Start with the side with the locking device.
• Make sure the roller blind is securely engaged on both sides.
• Pull locking device - 3  -.
• Check function of roller blind. Roller blind must roll in a minimum up to 3/4.