Emergency Unlock Handle, Removing and Installing

Special tools, testers and auxiliary items required 

Fig 1: Torque Wrench V.A.G 1783

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Torque wrench V.A.G 1783

Removing 

Fig 2: Emergency Unlock Handle, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip cover - 1  -.
• Remove bolt - 4  -.
• Remove handle - 2  -.

3 - Handle cover clipped into the rear lid trim

Installing 

Installation is reverse of removal.

Tightening torque:

Handle to handle cover: 4.5 Nm