Right suction jet pump, removing and installing
Removing
Observe safety precautions → Safety precautions .
Observe rules for cleanliness → Rules for cleanliness .
- Remove right fuel delivery unit → Right fuel delivery unit with Fuel Pump (FP) G23 , removing and installing .
- Remove right Fuel Level Sensor 4 G393 (tubular sensor) out of fuel tank.
- Through left fuel tank opening, separate suction jet pipe - 5 - from Y-piece, by pressing release button.
- Through left fuel tank opening, press release buttons - arrows - and remove fuel delivery line - 2 -.
NOTE:
- Ignore - 1 -.
- Pull fuel delivery line out through right fuel tank opening.
- Through right fuel tank opening, press release button - arrow - and pull bracket for suction jet pipes from mounting.
- Pull right suction jet pipe with lines out toward right fuel tank opening.
Installing
- Set right suction jet pump - 1 - into fuel tank so that is positioned in recess of front fuel tank baffle plate - 2 - , as shown in illustration.
- Press suction jet pump bracket into mount until it engages audibly.
- Feed fuel delivery line through the right fuel tank opening into left chamber of fuel tank. Observe routing:
- The fuel delivery line - 1 - must be routed under fuel filling line - 2 - in area of left fuel tank opening.
NOTE:
- Ignore - 3 -.
- Press fuel delivery line - 2 - onto left fuel delivery unit until it engages audibly.
NOTE:
- Ignore - 1 -.
- Through right fuel tank opening, feed suction jet pipe - 5 - toward left chamber of fuel tank.
- Push suction jet pipe onto Y-piece until it engages audibly.
- Insert Fuel Level Sensor 4 G393 in fuel tank.
- Install right fuel delivery unit → Installing .