Fog Lamps, Audi A8, Removing and Installing

Removing 

Fig 1: Removing Air Intake Grille From Fog Lamp Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Switch off ignition and remove ignition key.
• Turn light switch into "0" position.
• Pull off air inlet grille in lower section of bumper cover - arrows  -.

Fig 2: Fog Light Housing Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - arrows  - and remove fog light housing from bumper cover.
• Disconnect connector.

Installing 

Install in reverse order of removal, observing the following:

• Adjusting fog lamps → 01 - MAINTENANCE .

Tightening torque