Garage Door Opener Control Module, Removing and Installing

Removing 

Fig 1: Garage Door Opener Control Module, Electrical Connector & Retainer Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove front bumper cover → 63 - BUMPERS .
• Remove bolt - 3  - and detach retainer.
• Remove Garage Door Opener Control Module - 2  - out of bumper cover.
• Disconnect electrical connector - 1  -.

Installing 

Install in reverse order of removal, observing the following:

• Install front bumper cover → 63 - BUMPERS .

Tightening torque