Rear Backrest Cover, Separating from Upholstery
1 - Cover
- Removing
- Using an awl V.A.G 1636 A - 5 -, pry the bracket - 3 - out of the plastic clips - 4 -.
- Remove cover - 1 - from upholstery - 2 -.
- Installing
- Replaced damaged plastic clips.
- First press retainers of cross braces into plastic clips.
- Install cover in reverse order of removal.
2 - Upholstery
3 - Retainer
4 - Plastic clips
5 - Awl V.A.G 1636 A