Rear lights in rear fenders, aligning with body contour

Fig 1: Screwing Adjusting Nut Gradually In And Out With Tail Lamp Removed

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Adjustment in driving direction:

• Screw adjusting nut - 1  - gradually in and out - arrow  - with tail lamp removed (→ Rear lights / rear light bulb holder in rear fenders, removing and installing ).

Fig 2: Pushing In And Pulling Out Retaining Element

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Adjustment perpendicular to driving direction:

• With tail lamp removed (→ Rear lights / rear light bulb holder in rear fenders, removing and installing ), gradually push in and pull out - arrow  - retaining element - 1  - after loosening bolts - 2  - and - 3  -.

Tightening torques