High-mount brake lamp - Sedan, removing and installing

Fig 1: Pulling Roof End Trim From Roof Frame

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Do not operate brake pedal.
• Carefully pull roof end trim - 1  - from roof frame - arrows  -.

Fig 2: Pulling Release Levers Outward At High-Mount Brake Light

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pull release levers - 1  - and - 4  - outward - arrows  - at high-mount brake light - 2  -.
• Disconnect electrical harness connector - 3  - at high-mount brake light.

Installing 

Installation is performed in the reverse order of removal.