Seat heating element (glued in), removing and installing

Removing: 

• Remove seat: Vehicles until 10.04 → Front seats (standard seat), removing and installing , vehicles from 11.04 → Front seats (standard seat), removing and installing .
• Remove seat cover → Front seat covers and upholstery .

Fig 1: Seat Heating Element (Glued In) Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Cut wire - 2  - off of old heating element - 1  -.

Installing: 

• Align heating element - 1  - on seat surface, remove protective foil and glue heating element to cushion.
• Slide electrical wire - 2  - into openings - 3  -.
• Lay wire connections without crossing into bottom of openings at positions - 4  -.