Headrest guides, removing and installing

Removing 

Fig 1: Headrest Guides, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

For clarity, headrest guide - 1  - is shown removed.

• Insert an upholstery needle or screwdriver - 3  - (max. width 2 mm) into hole - 4  - (hole - 4  - is located across from retaining clip for headrest guide).
• Pry screwdriver - 3  - in direction of arrow - A  - and press catch - 2  - in direction of arrow - B  -, pull out headrest guide - 1  - while doing so.

Installing 

Installation is reverse of removal.