LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> RS 4 >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers) >> 72 - Seat - Frames >> Rear seats >> 2/3 right backrest, removing and installing

2/3 right backrest, removing and installing

Fig 1: 2/3 Right Backrest Remove/Install Components
GW00021034Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Backrest

2 - Clamp

3 - Trim

Fig 2: Identifying Backrest, Center Bracket, Fitting & Grommet
GW00021035Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 3: Identifying Backrest, Center Bracket, Fitting & Grommet
GW00021035Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • If the sleeve - 4  - of fitting is pulled out as well, attach it again.
  • Installing: 

Installation is reverse of removal.

Fig 4: Identifying Backrest, Center Bracket, Fitting & Grommet
GW00021035Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Backrest

2 - Center bracket

3 - Fitting

4 - Grommet