Four-way lumbar support switch, removing and installing

Special tools, testers and auxiliary items required 

Fig 1: Special Tool - Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Engine and transmission holder VAS 6095

Fig 2: Fixture For Seat Repair VAS 6136

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Fixture for seat repair VAS 6136

Fig 3: Four-Way Lumbar Support Switch Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Removal

• Remove seat → Front power seats with memory, removing and installing .
• Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
• Attach the front seat to the fixture for seat repair VAS 6136.
• Remove seat side trim on sill side → Side panels on door sill side, removing and installing .

• Remove bolts - 4  - (2x).
• Remove four-way lumbar support switch - 3  -.

• Installing 

Installation is reverse of removal. When doing so, note the following:

• Tightening torques for bolts - 4  - : 0.4 Nm