Four-way lumbar support switch, removing and installing

Special tools, testers and auxiliary items required 

Fig 1: Special Tool - Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Engine and transmission holder VAS 6095

Fig 2: Fixture For Seat Repair VAS 6136

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Fixture for seat repair VAS 6136

Removing 

• Remove seat → Front power seats with memory, removing and installing .
• Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
• Attach the front seat to the fixture for seat repair VAS 6136.
• Remove seat side trim on sill side → Side panels on door sill side, removing and installing .

Fig 3: Four-Way Lumbar Support Switch Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - 4  - (2x).

Tightening torque: 0.4 Nm

• Remove four-way lumbar support switch - 3  -.

Installing 

Installation is reverse of removal.