Inner part, removing from outer part
- Open storage compartment.
- Press retainers - 2 - (Qty. 2) upward in - direction of arrow A -.
- Tip inner part - 1 - down in - direction of arrow B -.
- Remove outer part - 1 - from guide - arrow - on inner part - 2 -.
Storage compartment, assembling
Assembly is performed in the reverse order of removal. Observe the following when doing so:
- Engage torsion spring - 1 - so that shorter side - arrow A - is supported on inner part - 2 - and longer side - arrow B - is supported on handle - 3 -.