LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> RS 4 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers) >> 72 - Seat - Frames >> Front RS sport seat >> Connector housing with terminal resistance for side airbag

Connector housing with terminal resistance for side airbag

Fig 1: Connector Housing With Terminal Resistance For Side Airbag
GW00021015Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • The RS sport seat has no side airbag. Therefore, the electrical connection for the side airbag must have a terminal resistance - arrow  - in the wiring harness.
  • Depending on the version, this terminal resistance is securely connected to the wiring harness, or is designed as a separate connector housing with terminal resistance.
scientia non olet · About LEMON Manuals