Rear door power window switches, removing and installing

Removing 

• Remove rear door trim: → 70 - INTERIOR TRIM .

Fig 1: Locating Screws

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws - 1... 3  -.
• Remove armrest and disconnect electrical connection.

Fig 2: Pulling Switch Mounting From Armrest

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pull switch mounting - 1  - from armrest - 2  - - arrow  -.

Fig 3: Using Small Screwdriver To Carefully Release Fasteners

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Use small screwdriver to carefully release fasteners - arrows  -.
• Pull out window switch downwards.

Installing 

Install in reverse order of removal, noting the following:

• Press window switch into switch mounting until retaining hooks engage.
• Install rear door trim → 70 - INTERIOR TRIM .