Front Parking Aid Warning Buzzer -H22-, REMOVING AND INSTALLING, 8-CHANNEL PARKING AID
Removal
-- Remove driver's side upper instrument panel cover, refer to INSTRUMENT PANEL COVERS ON DRIVER SIDE OVERVIEW .
-- Release retaining clips -1- and -3- and pivot center instrument panel relay and fuse panel out of retaining frame in direction of -arrow-.
-- Remove nut -4-.
-- Release retainer -3- and disengage center instrument panel relay and fuse carrier bracket at threaded pins.
-- Slide center instrument panel relay and fuse panel bracket up slightly to disengage retaining pins -1- on central tube.
-- To disengage attachment -2-, pull center instrument panel relay and fuse panel out of body toward passenger compartment.
-- Remove center instrument panel relay and fuse panel toward passenger compartment.
-- Unclip Front Parking Aid Warning Buzzer -H22- item -1- in direction of -arrow- out of center instrument panel relay and fuse panel.
-- Disconnect electrical connector -2-.
Installation
Install in reverse order of removal. Note the following:
-- Install driver's side upper instrument panel cover, refer to INSTRUMENT PANEL COVERS ON DRIVER SIDE OVERVIEW .
Tightening Specifications
| Component | Nm |
|---|---|
| Center instrument panel relay and fuse panel to central tube | 3 |