LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Left Cylinder Head Cover, Removing And Installing >> Removing

Left Cylinder Head Cover, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ignition Coil Puller T40039 Removing Ignition Coils
GWWA28-0074Courtesy of AUDI OF AMERICA, LLC

-- Remove the ignition coils. Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .

CAUTION:

Risk of violating emissions legislation.

  • Do not open the hose connection -arrow-.

-- Remove the bolts in the following sequence -12 through 1- and lay the left cylinder head aside with the crankcase ventilation hose -arrow- connected.

scientia non olet · About LEMON Manuals