Overview - SUBFRAME

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Carrier, Engine Mount And Engine Mount Bracket Overview

Courtesy of AUDI OF AMERICA, LLC

Engine Support
- Removing and installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING
Bolt
- 120 Nm +180° turn
- Replace
Right Engine Mount
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING
Bolt
- Tightening specification: 50 Nm
Bolt
- Tightening specification: 40 Nm
Nut
- Tightening specification: 75 Nm
Right Engine Support
- Illustration does not correspond to version in vehicle.
Left Engine Support
Bolt
- Tightening specification: 50 Nm
Nut
- Tightening specification: 75 Nm
Bolt
- Tightening specification: 60 Nm
Left Engine Mount
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING
Bolt
- Tightening specification: 120 Nm + 180° turn
- Replace