LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the Counterhold - Flywheel 10-201 to loosen the bolts.

Fig 1: Lock Flywheel Using Counter Hold Tool 10-201
GWWA13-0574Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts, drive plate and sensor wheel.

scientia non olet · About LEMON Manuals