LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block - Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Installing

Ribbed Belt TENSIONER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Install the left front coolant pipes. Refer to LEFT FRONT COOLANT PIPES, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals